Icom ID-31A

9
PRIORITY WATCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
9-5
Checks the selected bank channel (priority channel),
while receiving on a VFO frequency.
Push [V/MHz] q
to select the VFO mode.
Rotate [DIAL] to set the receive frequency. w
Push [M/CALL] e
to select the memory mode.
Push r
.
Push D-pad( t ) to select “Bank Select,” and then
push D-pad(Ent).
• The list of banks is displayed.
D-pad
(�)
(Ent)
Push D-pad( y ) to select the bank that contains the
channel to watch, and then push D-pad(Ent).
Rotate [DIAL] to select the bank channel to watch. u
Push i
.
Push D-pad( o ) to select “PRIO Watch,” and then
push D-pad(Ent).
• ON : When a signal is received on the prior-
ity channel, the memory bank mode is
automatically selected.
• Bell : When a signal is received on the prior-
ity channel, the “
” icon appears in the
VFO mode.
!0 Push D-pad() to select “ON” or “Bell,” and then
push D-pad(Ent).
• The “PRIO” icon is displayed and the priority scan
starts.
• To cancel the scan, push [CLR]
.
■ VFO FREQUENCY AND BANK CHANNEL
[DIAL]
Appears Appears
Checks the bank chan-
nel every 5 seconds.
Example: Checks bank channel “Z98”
every 5 seconds,
while receiving on 433.000 MHz.
Push
.
Push
.
Push [M/CALL]
.
(Continued on page 9-6.)
Previous view