Icom ID-31A

4
DR MODE <ADVANCED>
4-28
Repeater list programming (Continued) ■
15. Storing the repeater list
^2 Push D-pad(
) to select “<<Add Write>>,” and then
push D-pad(Ent).
^3 Push D-pad() to select “YES,” and then push D-
pad(Ent).
• The programmed contents are stored to the repeater list,
and the transceiver is returned to the RPT LIST screen.
To cancel the programmed data:
To cancel the programmed
data, push [CLR] to
display “Cancel edit?.” Push
D-pad() to select “YES,”
and then push D-pad(Ent)
to cancel programming and the transceiver returns
the RPT LIST screen.
■ Editing a repeater list
This function re-programs a repeater’s data. This is
useful when already-programmed data is incorrect,
has changed or some data should be added to the
list.
Push [MENU] q .
Push D-pad( w ) to select the root item (“DV Memo-
ry”), and then push D-pad(Ent).
Push D-pad( e ) to select “Repeater List,” and then
push D-pad(Ent).
Push D-pad( r ) to select the repeater group that in-
clude the repeater you want to edit, and then push
D-pad(Ent).
Push D-pad( t ) to select the repeater to be edited.
Push y .
Push D-pad( u ) to select “Edit.”
Push D-pad( i ) to select the desired item, and then
push D-pad(Ent).
• See pages 4-21 to 4-28 for programming details.
After programming, returns to the REPEATER LIST o
EDIT screen.
!0 Push D-pad() to select “<<Overwrite>>,” and then
push D-pad(Ent).
!1 Push D-pad() to select “YES,” and then push D-
pad(Ent).
• The programmed contents are overwritten on the re-
peater list, and the transceiver returns the RPT LIST
screen.
Select
*
* “<<Overwrite>>” appears when “Edit” is selected in
[1. Repeater group selection].
Example:
“East Tokyo” is
entered.
D-pad
(�)
(Ent)
Previous view