4
DR MODE <ADVANCED>
4-8
EMR communication (Continued) ■
D Adjusting the EMR AF level
The audio output level when an EMR signal is received
is adjustable between 0 and 39.
When an EMR signal is received, the audio will be
heard at the preset level, or the [VOL] control level,
whichever is higher.
To disable the setting, set it to “0.”
Push [MENU] q .
Push D-pad( w ) to select the root item (“DV Set”),
and then push D-pad(Ent).
Push D-pad( e ) to select “EMR AF Level,” and then
push D-pad(Ent).
Push D-pad( r ) to adjust the EMR audio output level
between 0 (minimum) and 39 (maximum) in 1 step.
(Default: 19)
Push [MENU] t to exit the MENU screen.
■ Display type setting
The display type in the DR mode, such as a repeater
name, call sign, and so on, can be set to Large.
(Default: Normal)
Push q .
Push D-pad( w ) to select “Display Type,” and then
push D-pad(Ent).
Push D-pad( e ) to select “Large,” and then push D-
pad(Ent).
• The display type changes to large such as the repeater
name set to “TO” and “FROM”.
To Next Page
Loading...
