Icom ID-31A

9
PRIORITY WATCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
9-13
Checks the selected Call channel (priority channel),
during a VFO scan.
Push [M/CALL] q
to select the Call channel
mode.
Rotate [DIAL] to select the Call channel you want w
to watch.
Push [V/MHz] e
to select the VFO mode.
Push [FM/DV] r
to select the receive mode.
Hold down [SCAN] t
for 1 second.
Push D-pad( y ) to select the scan type, and then
push D-pad(Ent) to start the VFO scan (p. 8-4).
D-pad
(�)
(Ent)
Push u .
Push D-pad( i ) to select “PRIO Watch,” and then
push D-pad(Ent).
• ON : When a signal is received on the prior-
ity channel, the Call channel mode is
automatically selected.
• Bell : When a signal is received on the prior-
ity channel, the “
” icon is displayed
in the VFO mode.
Push D-pad( o ) to select “ON” or “Bell,” and then
push D-pad(Ent).
• The “PRIO” icon is displayed and the priority scan
starts.
• Regardless of the scan setting, when a signal is re-
ceived during the scan, the transceiver continues to
check the Call channel every 5 seconds.
• Push [CLR]
to cancel the priority scan and VFO
scan.
■ VFO SCAN AND CALL CHANNEL
Appears Appears
Blinks
Blinks
Blinks
Blinks
Checks the Call chan-
nel every 5 seconds.
Example: Checks Call channel “C0”
every 5 seconds,
during a VFO scan.
Push
.
Hold down [SCAN]
for 1 second.
[DIAL]
(Continued on page 9-14.)
Previous view