9
PRIORITY WATCH
9-12
When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel,
the memory bank mode is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel,
a beep sounds and the “ ” icon blinks. The VFO
scan resumes.
Blinks
Automatically changes to the bank channel mode.
Remains in the VFO mode.
Blinks
Blinks
Blinks
VFO SCAN AND BANK CHANNEL (Continued) ■
To Next Page
Loading...
