8
SCAN OPERATION
8-10
Example: Set “SKIP” to bank channel “Z98.”
Memory channel number
Rotate [DIAL] to select the
memory channel.
Push
.
Push D-pad(Ent).
“SKIP” is set.
■ Setting and clearing skip
channel
The channels set as “SKIP” skip channels are skipped
(not scanned).
Push [M/CALL] q
to select the memory mode.
Rotate [DIAL] to select the memory channel to be w
set as a skip channel.
Push e
.
Push D-pad( r
) to select “SKIP,” and then push
D-pad(Ent).
• OFF : Cancel the skip setting.
• SKIP : Skipped during a memory scan.
• PSKIP : Skipped during both VFO and memory
scans.
To cancel the skip, D-pad( t ) to select “OFF,” and
then push D-pad(Ent) to save the selection.
• The skip is set or cleared.
[DIAL]
To Next Page
Loading...
