Icom ID-31A

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-1
Section 3
DR MODE <BASIC>
Making a Local area call ■ .............................................................................. 3-2
D Making a CQ call through your local area (access) repeater (Local Area CQ) .. 3-2
Making a Gateway call ■ ................................................................................. 3-3
Making a CQ call through a gateway repeater (Gateway CQ) D ................. 3-3
One-touch reply after receiving a call ■ .......................................................... 3-4
“UR” (Destination call sign) programming using the RX History ■ .................. 3-5
“FROM” (Access repeater) setting ■ ............................................................... 3-7
“ D FROM” (Access repeater) setting using the preloaded repeater list ....... 3-8
“ D FROM” (Access repeater) setting using the Repeater Search function .. 3-9
“ D FROM” (Access repeater) setting using the TX History ........................ 3-11
“ D FROM” (Access repeater) setting using the DR mode scan ................. 3-12
“TO” (Destination) setting ■ ........................................................................... 3-13
“TO” D (Destination) setting using the “Your Call Sign” .............................. 3-14
“TO” D (Destination) setting using the RX History ..................................... 3-15
“ D TO” (Destination) setting using the TX History ...................................... 3-16
“ D TO” (Destination) setting using the [Direct Input (UR)] .......................... 3-17
“ D TO” (Destination) setting using the [Direct Input (RPT)] ........................ 3-18
About “UR?” and “RPT?” error messages ■ .................................................. 3-19
Shows “ D UR?” .......................................................................................... 3-19
Shows “RPT?” or “RX” D ............................................................................ 3-19
Shows “L” D ................................................................................................ 3-19
Making a Simplex call ■ ................................................................................ 3-20
Making a CQ call through no repeater (Simplex CQ) D ............................. 3-20
For your reference ■ .................................................................................... 3-21
Making a Simplex call in the VFO mode D ................................................. 3-21
Making a Local Area call or a Gateway call in the VFO mode D ................ 3-22
IMPORTANT!
• The repeater list, described in this manual, may differ from your transceiver’s preset contents.
• Although the Japanese repeaters are used in the setting examples, the Japanese repeater node (port) letters
are different from other country’s.
Be sure to add a repeater node letter as the 8th digit in the call sign field after a repeater call sign, according to
the repeater frequency band, as shown below.
1200 MHz : A (B in Japan)
430 MHz : B (A in Japan)
144 MHz : C (no D-STAR
®
repeaters in Japan)