10
MENU SCREEN OPERATION
10-38
■ Call sign items
Call Sign
Call Sign(CALL SIGN)
Sets or displays the “UR,” “R1,” “R2” and “MY” call signs to be used for DV
operation.
Except for the DR mode, sets the desired call signs to be used for DV op-
eration in this screen.
For Simplex operation (DV mode)
“UR” (p. 3-21) and “MY” (p. 2-5) call signs can be set.
For Duplex (repeater) operation (DV/DR mode)
While in the DR mode, the only “MY” (p. 2-5) call sign can be set.
<To set Duplex (repeater) operation>
Example : While in the DV mode, Making a Gateway call
Making a gateway CQ call to Hamacho repeater (JP1YIU B)
from the Hirano repeater (JP3YHH B)*, while in the DV mode.
* Before starting to set the call sign, set the frequency of your access repeater or
duplex direction. (See pages 23 and 30 on the printed manual.)
NOTE:When the Digital Repeater Setting function is ON, the repeater
call sign can be automatically set. (p. 10-46)
1. Call sign (“R1”) setting
While in the DV mode, push D-pad( q
) to select “R1,” and then push .
Push D-pad( w ) to select “Edit,” and then push D-pad(Ent).
Rotate [DIAL] to select the first character. e
• Alphanumeric characters and symbol (“/”) can be entered.
Push r to move the cursor backward, or push to move the cursor
forward.
Repeat steps t e and r to enter a name of up to 8 characters, including
a spaces.
After entering, push D-pad(Ent) to set. y
(Continued on the next page.)
To Next Page
Loading...
