12
USING A MICROSD CARD
12
12-9
The saved memory channels, item settings the in menu
list and repeater lists can be copied to the transceiver.
This function is convenient when copying the saved
data, such as memory channels, or repeater lists, to
another ID-31A/E and then operating with the same
data.
(Example: Loading all the data in the
“Set20110715_01” file)
Push [MENU] q .
Push D-pad( w ) to select the root item (“SD Card”),
and then push D-pad (Ent).
Push D-pad( e
) to select “Setting Load,” and then
push D-pad (Ent).
Push D-pad( r ) to select the desired file to be load-
ed, and then push D-pad (Ent).
(Example: Selecting “Set20110715_01”)
• The FILE LOAD screen appears.
Push D-pad( t ) to select the desired loading con-
tent, as shown below.
• ALL: Loads all memory channels, item settings in the
menu list and the repeater list into the transceiver.
• Except My Station:
Loads all memory channels, item settings in the
menu list except MY call signs and the repeater list
into the transceiver.
• Repeater List Only:
Loads only the repeater list into the transceiver.
(☞ Continued on the next page)
■ Loading the saved data les that are in the microSD card
Saving the current data is recommended before load-
ing other data into the transceiver.
To Next Page
Loading...
