12
USING A MICROSD CARD
12-10
Push D-pad(Ent) to select the file, and then the y
“Keep 'SKIP' setting in Repeater List?” appears.
Push D-pad( u ) to select “YES” or “NO.”
• When “YES” is selected, the skip setting (p. 4-32) of the
repeater list is retained.
Push D-pad(Ent), “Load file?” appears. i
Push D-pad( o ) to select “YES,” then push D-pad(Ent)
to start the file check.
• While checking the le, “FILE CHECKING” and a prog-
ress bar are displayed.
!0 After checking, settings data loading starts.
• While loading, “LOADING” and a progress bar are dis-
played.
!1 After loading, “COMPLETED!” appears.
To complete the loaded, reboot the transceiver.
Loading the saved settings file that are in the microSD card (Continued) ■
To Next Page
Loading...
