Icom ID-31A

9
PRIORITY WATCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
9-7
Checks the selected Call channel (priority channel),
while receiving on a VFO frequency.
Push [V/MHz] q
to select the VFO mode.
Rotate [DIAL] to set the receive frequency. w
Push [M/CALL] e
to select the Call channel
mode.
Rotate [DIAL] to select the Call channel you want r
to watch.
Push t
.
Push D-pad( y ) to select “PRIO Watch,” and then
push D-pad(Ent).
• ON : When a signal is received on the pri-
ority channel, the Call channel mode
is automatically selected. The “PRIO”
icon blinks on the screen.
• Bell : When a signal is received on the prior-
ity channel, the “
” icon blinks in the
VFO mode.
D-pad
(�)
(Ent)
Push D-pad( u ) to select “ON” or “Bell,” and then
push D-pad(Ent).
• The “PRIO” icon appears and the priority scan
starts.
• To cancel the scan, push [CLR]
.
■ VFO FREQUENCY AND CALL CHANNEL
Checks the Call chan-
nel every 5 seconds.
AppearsAppears
Example: Checks Call channel “C0”
every 5 seconds,
while receiving on 431.860 MHz.
Push
.
Push [M/CALL]
.
[DIAL]
(Continued on page 9-8.)
Previous view