9
PRIORITY WATCH
9-8
When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel,
the Call channel mode is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel, a
beep sounds and the “ ” icon is displayed on the
screen.
Blinks
Automatically changes to the Call channel mode.
Remains in the VFO mode.
Blinks
VFO FREQUENCY AND CALL CHANNEL (Continued) ■
To Next Page
Loading...
