10
MENU SCREEN OPERATION
10
10-37
Comment
GPS > GPS TX Mode > GPS-A(DV-A) > Comment(COMMENT)
Enter a comment of up to 43 characters to transmit with the position data.
Comment edit screen
(In case of up to 43 characters)
The number of characters to enter will differ, depending on the Data
Extension and Altitude settings. (p. 10-33)
Data Extension Altitude The number of characters
OFF OFF Up to 43 characters (Default)
OFF ON Up to 35 characters
Course/Speed OFF Up to 36 characters
Course/Speed ON Up to 28 characters
The symbol “ ” shows the transmittable comment range. Please note
that the characters that exceed the range from the symbol will not be
transmitted.
Transmittable comment range display
(In case of up to 28 characters)
This comment item will be hidden when “GPS(DV-G)” or “OFF” is selected in “GPS
TX Mode.”
GPS Auto TX (Default: OFF)
GPS > GPS Auto TX(GPS AUTO TX)
Select an option for the GPS automatic transmission function.
This function automatically transmits the current position data received
from a GPS receiver, as well as any programmed GPS message, at the
selected interval.
• OFF : Turns the function OFF. However, you can transmit the
position data manually by pushing [PTT].
• 5 sec to 30 min : Transmits the current position data at the selected in-
terval (5*, 10, or 30 seconds, or 1, 3, 5, 10, or 30 min-
utes).
* When four GPS sentences are selected at the same
time in GPS Sentence Mode, “5sec” cannot be select-
ed.
NOTE:When “Manual” is selected in GPS Select, the current position
data will not be automatically transmitted.
To Next Page
Loading...
