5
GPS/GPS-A OPERATION
5
5-15
Example: Alarm Area 2
Setting alarm for all GPS Memories.
Push [MENU] q .
Push D-pad( w ) to select the root item (GPS), and
then push D-pad(Ent).
Push D-pad( e ) to select “GPS Memory,” and then
push D-pad(Ent).
Push D-pad( r ) to select “RX.”
• If you wish to set the alarm to a specified GPS
memory channel, select “All” or a channel from be-
tween “A to Z.”
Push t .
Push D-pad( y ) to select “Alarm ON,” and then push
D-pad(Ent).
• When the alarm is set, is displayed next to the
item.
u Push [MENU] to exit the Menu screen.
• When a set station is in the approximate 1 kilome-
ter range, GPS Alarm beeps once, and when it is
in the approximate 500 meter range, beeps three
times. (Default setting : Both)
• When the GPS alarm beeps, “GPS ALARM” pops
up on the screen, and then the S icon blinks.
• To cancel a GPS alarm, repeat step y and select
“Alarm OFF.”
•
GPS Alarm beeping screen
NOTE: When “RX” or memory channel is selected, the
alarm functions depend on the “Alarm Area2” setting in
the Menu screen. (p. 10-25)
(MENU > GPS > GPS Set > Alarm Area 2)
When alarm
is set,
is
displayed.
S
blinks
Beeps sound,
depending
on the setting
of the alarm
area.
To Next Page
Loading...
