Icom ID-31A - Page 263

11
OTHER FUNCTIONS
11-10
DTCS squelch operation ■
DTCS code setting and operation (Continued) D
Push [MENU] u to return to the VFO mode.
Push i .
• The QUICK menu list is displayed.
Push D-pad( o ) to select “TONE” item.
!0 Push D-pad() to select either “DTCSS" or
“DTCS" option.
• DTCSS : The DTCS squelch with pocket beep
function ON.
• DTCS : The DTCS squelch function ON.
* Select “DTCS-R” when stands by the reversed tone
squelch function.
!1 Push D-pad(Ent) to set the DTCS squelch function
and return to VFO mode.
!2 Holding down [PTT] and call a desired station. Oper-
ate as the normal way.
For your information: Sounds beep when a call
is received.
If “DTCSS” is selected in step 10, beeps sound
for 30 seconds and the icon “S” blinks when a call
with the matched DTCS code signal is received.
After receiving a call, hold down [PTT] within ➥
30 seconds then start conversation, or push
D-pad(Ent) to cancel the pocket beep function
(“S” icon disappears). After that, the transceiv-
er selects regular DTCS squelch operation.
If no operation is performed within 30 seconds,
beeps stop sounding and the “S” icon blinking
remained.
• When receiving a call with “DTCSS”
Beep, Beep, Beep...
Return to VFO mode
screen with FM or FM-N
mode selection.
(Example: FM mode)
Push D-pad() to select
“TONE.”
Push D-pad() to select
“TONE.”
(Example: DTCS)
“DTCS” icon appears.
*When reversed tone
squelch is selected in
step !
0, “DTCS-R” icon
appears.
QUICK MENU list screen
is displayed.
(Continued from step y on the previous page)
Push
Push D-pad(Ent).
Push D-pad(Ent).
D-pad
(�)
(Ent)
Previous view