8
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8-5
• When the scan name is assigned
• When the program link name is assigned
• When the scan name is not assigned
• When the program link name is not assigned
VFO mode scan (continued) D
Scan name “SCAN0”
Program link name “LINK0”
Scan edges
Program link
When a scan name is assigned.
When a scan name is assigned, the scan type can be
set by selecting the scan name from the scan type list.
(Step r on page 8-4.)
NOTE: The scan name is not displayed during a
scan.
When a program link name is assigned.
When a program link name is assigned, the scan type
can be set by selecting the program link name from the
scan type list. (Step r on page 8-4.)
NOTE: The program link name is not displayed dur-
ing a scan.
To Next Page
Loading...
