9
PRIORITY WATCH
9-28
When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel,
the Call channel mode is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel,
a beep sounds and the “PRIO” icon blinks on the
screen.
Blinks
Blinks
Remains in the DR mode.
Automatically changes to the Call channel mode.
DR MODE AND CALL CHANNEL (Continued) ■
To Next Page
Loading...
