10
MENU SCREEN OPERATION
10
10-17
Program scan link name programming
q Push D-pad() to select a program scan link number between 0 and 9.
w Push .
e Push D-pad(Ent) to enter the name edit mode.
r Rotate [DIAL] to select the first character of the name you wish to pro-
gram. (For example: A)
• The selected digit blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
to change the character to a upper case
or lower case letter.
• While selecting a digit, push
to open the input mode selection window.
• A space can be selected for any input mode selected.
• Push [CLR]
to erase the selected character, or hold down [CLR] to
continuously erase the characters after the cursor.
• See page 4-2 for programming details.
t Push D-pad(") to move the cursor to the second digit.
y Repeat steps r and t to enter a name of up to 16 characters, including
spaces. (For example: Area 5 D-Star )
After entering the name, push D-pad(Ent) one or more times. u
i Push [MENU] to exit the [MENU] screen.
To Next Page
Loading...
