10
MENU SCREEN OPERATION
10
10-31
GPS Sentence (Default: GGA)
GPS > GPS TX Mode > GPS(DV-G) > GPS Sentence(GPS SENTENCE)
Select sentences to be transmitted in the GPS mode to transmit position
data.
• Select up to 4 of the 6 GPS sentences to transmit at the same time. RMC, GGA,
GLL, VTG, GSA and GSV sentences are selectable.
Even if the GPS Auto TX Timer is set to “5 sec.,” when 4 sentences are selected
in this setting, the time the GPS Auto TX Timer will automatically be changed to
“10 sec.”
• “VTG," “GSA” and “GSV” sentences will not be transmitted when your position has
been set manually.
This GPS Sentence item will be hidden when “GPS-A(DV-A)” or “OFF” is selected
in “GPS TX Mode."
• Contents of GPS sentence
Sentence Lon/Lat Alt UTC
Date
(UTC)
Status 2D/3D
COG
(True)
SOG
(knot)
RMC
✔ ✔ ✔ ✔
GGA
✔ ✔ ✔ ✔
GLL
✔ ✔ ✔
VTG
✔ ✔
GSA
✔ ✔
GSV
Sentence Others
RMC Mode Indicator
GGA
Number of satellites in use, HDOP, Geoidal separation, Age of
Differential GPS data
GLL Mode Indicator
VTG
COG (Magnetic north), SOG (km/h), Mode Indicator
GSA
ID numbers of satellites used in solution, PDOP, HDOP, VDOP
GSV
Total number of sentences, Sentence number, Total number of sat-
ellites in view, Satellite information (ID, Elevation, Azimuth, S/N)
NOTE:
Set the GSV sentence to OFF when sending the GPS message to con-
ventional digital transceivers (IC-2820H, IC-E2820, ID-800H, IC-91AD,
IC-E91, IC-V82, IC-U82, IC-2200H, ID-1).
The GSV sentence is incompatible with them. Those transceivers will
not display GPS messages properly if sent as a GSV sentence from the
ID-31A/E.
To Next Page
Loading...
