10
MENU SCREEN OPERATION
10-34
GPS-A Symbol (Default: Person)
GPS > GPS TX Mode > GPS-A(DV-A) > GPS-A Symbol(GPS-A SYM-
BOL)
The GPS-A symbol is an icon which represents your means of transporta-
tion or location.
The stored GPS-A symbol in the selected GPS-A channel (1 to 4) is trans-
mitted with position data while in the GPS-A mode.
To change the GPS-A symbol channel, push D-pad(
) to select, and then
push D-pad(Ent) to set.
“Car” is selected
This GPS-A Symbol item will be hidden when “GPS(DV-G)” or “OFF” is selected in
“GPS TX Mode.”
GPS-A Symbol channel
A GPS-A symbol can be set to GPS symbol channels 1 to 4.
You can select a desired GPS-A symbol different than the preprogrammed
one or other symbol by entering a 2 character GPS-A code. (p. 10-35)
Selecting a GPS-A symbol with a 2 character symbol code
Push D-pad( q
) to select a desired GPS-A Symbol channel between 1
and 4.
Push w to select “Edit Symbol,” and then push D-pad(Ent).
Push e again.
Push D-pad( r ) to select “Direct Input,” and then push D-pad(Ent).
Rotate [DIAL] to select the first digit. t
• Usable characters: /, \, 0 to 9, A to Z
Push y to select the second digit.
Rotate [DIAL] to select the second digit, u
and then push D-pad(Ent).
• Usable characters: Alphanumeric charac-
ters and symbols
Push D-pad(Ent) to set the GPS-A Sym- i
bol into the channel selected in step q.
• Returns to the GPS-A SYMBOL screen.
Pushing D-pad(Ent) again to set the o
GPS-A symbol channel, selected in step
q, which is used for GPS-A operation.
GPS items (Continued) ■
Second digit is selected
Selecting “1: Other”
To Next Page
Loading...
