Icom ID-31A

11
OTHER FUNCTIONS
11-8
Tone squelch operation ■
Tone squelch frequency setting and operation (Continued) D
Push [MENU] u to return to the VFO mode.
Push i .
• The QUICK menu list is displayed.
Push D-pad( o ) to select “TONE” item.
!0 Push D-pad() to select either “TSQL
S" or “TSQL”
option.
• TSQLS : The tone squelch with pocket beep
function ON.
• TSQL : The tone squelch function ON.
* Select “TSQL-R” when stands by the reversed tone
squelch function.
!1 Push D-pad(Ent) to set the tone squelch function
and return to VFO mode.
!2 Holding down [PTT] and call a desired station.
Operate as the normal way.
D-pad
(�)
(Ent)
For your information: Sounds beep when a call
is received.
If “TSQLS” is selected in step !0, beeps sound
for 30 seconds and the icon “S” blinks when a call
with the matched tone signal is received.
After receiving a call, hold down [PTT] within ➥
30 seconds then start conversation, or push D-
pad(Ent) to cancel the pocket beep function
(“S” icon disappears).After that, the transceiv-
er selects regular tone squelch operation.
• When receiving a call with “TSQLS”
Beep, Beep, Beep...
Return to VFO mode
screen with FM or FM-N
mode selection.
(Example: FM mode)
Push D-pad() to select
“TONE.”
Push D-pad() to select
“TSQL.”
(Example: TSQL)
“TSQL” icon appears.
*When reversed tone
squelch is selected in
step !
0, “TSQL-R” icon
appears.
QUICK MENU list screen
is displayed.
(Continued from step y on the previous page)
Push
Push D-pad(Ent).
Push D-pad(Ent).
Previous view