Inner Range Concept 4000 User Manual

98
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
Service: Menu Option 8
REQUEST SERVICE
This menu option causes an alarm message to be
sent to the Monitoring Station to Request a
Service call. (Only available V3.0 or later)
See “Important Notes” above.
Activating the “Request Service” function is
simply a matter of selecting the menu option by
pressing the key sequence shown above.
(<MENU>, <8>, <1>.)
The “Report Initiated” message will be displayed
on the LCD Terminal for approximately 2 seconds
when the function is activated.
(Version 4 or later only)
Press the <END> key to exit the menu. This will
not effect the call.
“REQUEST SERVICE” and “TEST REPORT”. IMPORTANT NOTES:
1) These options are only valid if the system is connected to a telephone line and the
function has been enabled in the Installer programming options.
2) You will need to check that the Monitoring Station provides the services and any
additional charges that may be incurred.







Inner Range Concept 4000 Specifications

General

Brand	Inner Range
Model	Concept 4000
Category	Touch terminals
Language	English