Inner Range Concept 4000 - Adjust Area User Count

105
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
ADJUST AREA USER COUNT
Adjust Area User Count allows a User with the
appropriate authority to reset an Area User
Counter (to 0) or to set the count value to the
required number.
(V5 or later only)
The display will show the first Area User Counter
and the current count value.
Use the <UP> and <DOWN> arrow keys to select
the Area User Counter to reset or adjust.
Use the <DIGIT> keys and <RIGHT> Arrow key
(if necessary) to enter in the count value then
press <OK>.
The <OFF> key can be used to clear the field.
(Reset to 0)
Press the <END> key to exit to the normal display
or select another Menu option.












, or
then












CONTROL