Inner Range Concept 4000 - Assign Main Menu Options

77
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
ASSIGN MAIN MENU OPTIONS
This display is used to define the Main Menu
options that the Menu Group will allow access to.
Use the <RIGHT> Arrow, followed by the <9>
(Y) & <5> (N) keys to set the desired options to
YES or NO.
<OK> key for next option. <UP> / <DOWN> to
edit this option for the previous/next Menu Group.






NOTE: Setting the [R]eview, [A]ccess or [Control] menu options to YES does not
enable access to all User options within those menus. To allow access to the
additional sub menu options, the appropriate options must also be set in the Sub
Menu options screen that follows.
[R]eview. (Information Menu) Review (If allowed by Sub Menu option), Locate
User, Read Analogue values, Read Counters and
View input states.
[A]ccess Menu. User Codes, User Types, Lists, and Groups.
(As allowed by Sub Menu options)
[I]solate Menu. Isolate / De-isolate Inputs.
See “Isolate. Menu Option 3” for details.
[T]est Menu. Area Walk Testing. (If enabled in the system)
(Only valid in V3 or later)
[t]imes Menu. Time/Date, TimeZones (If allowed by Sub Menu
options), Holidays.
[M] Miscellaneous Menu. Module Disable and UK Reset.
[S]ervice Menu. Answer Phone.
See “Service. Menu Option 8” for details.
[C]ontrol Menu. Home Auxiliaries, Lock/Open Doors, Secure/Free
Lifts and Adjust Counters (If allowed by Sub
Menu option).
or or
, or
Menu Grps