54
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
USER RANKS
(Replaced by User Tenancy in V6.2 or later)
Depending on your system configuration, you
may be able to program User Ranks.
If a User has the ability to Program/Edit Users
they can normally only access User numbers equal
to, or higher than, their own.
When a User has Ranks programmed, they can
only access User numbers that have a matching
rank set to YES and User numbers that have no
rank screen to program.
If Ranks are to be assigned to a User, use the
<RIGHT> Arrow, then the <9> (Y) & <5> (N)
keys to set the appropriate rank/s to YES or NO.
When complete: <OK> key to move on to the
next question for this User.
<UP> key to edit the previous User’s “Ranks”.
<DOWN> key to edit the next User’s “Ranks”.
NOTE: Understand how User
Ranks operate and plan before
attempting to program.
A detailed explanation &
examples are available in the
Programmer’s Manual.
or or
NOTES: 1) Blank Expiry Date & Time Fields will be ignored. e.g. / / 01 - 13 :
will mean that User’s Card will only work before 1PM on any day until 31/12/2001.
2) When a Code/Card expires all User programming (incl. User Type) is retained.
or or
- - -
- - etc.
EXPIRY DATE AND TIME
Depending on your system configuration, you
may be able to program when a User Code/Card
expires in the format DD/MM/YY - HH:MM.
Press the <OFF> key to clear the settings then use
the <DIGIT> keys and the <RIGHT> Arrow key
to program an expiry date/time.
The default setting shown, or all fields cleared,
means that the Expiry function will be ignored.
When complete: <OK> key to move on to the
next question for this User.
<UP> key to edit the previous User’s “Expiry”.
<DOWN> key to edit the next User’s “Expiry”.
, or
To Next Page
Loading...
Need help?
General