Inner Range Concept 4000 User Manual

57
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
EXTRA AREA
The Area/s that Users can control are normally
only defined by the Area ON List and Area OFF
List allocated to their “User Type”.
The “Extra Area” option allows one Area to be
allocated directly to a User.
The User will be allowed ON and OFF control
over the “Extra Area” regardless of whether or not
there are Area ON/OFF Lists in their User Type.
In a larger multi-Area system, where most Users
are only allowed control of a single Area, this
option would avoid the need to program many
different Area Lists.
Press the <RIGHT> Arrow key to scroll through
the Area names until the name of the required
Area is displayed. (If you need to return to the
start of the list at any stage, press the <OFF> key)
When complete: <OK> key to move on to select
the next User to program/edit. See Note below.
<UP> key to edit the previous User’s “Extra Area”
<DOWN> key to edit the next User’s “Extra Area”.
NOTE: If the “Extra Door / Extra Door List” feature
is enabled in your system, the <OK> key will move
on to the “Extra Door” and “Extra Door List”
selection screens for this User.






or or
NOTE: The Extra Area screen
will not be displayed if Extra
Area programming has been
disabled for your system.






USER EDIT

Inner Range Concept 4000 Specifications

General

Brand	Inner Range
Model	Concept 4000
Category	Touch terminals
Language	English