114
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
GSM Mobile phone Control and Alarm messages.
An optional GSM modem can be installed with your system and programmed to allow
communications via the GSM Digital Mobile network. (Only available V3.5 or later)
The GSM modem may be used to provide the primary or backup alarm reporting to a
Central Monitoring Station.
The GSM Short Message Service (SMS) can also be used to:
1) Send simple text commands from a GSM Mobile Phone to receive back system
status information or to control the system and receive back a text confirmation.
2) Send specified types of alarm text messages to a nominated GSM Mobile Phone.
The following features are available in V4.5 or later only
3) Send specified types of alarm text messages to a nominated GSM Mobile Phone
with a requirement for the Mobile Phone User to acknowledge the message.
4) Broadcast specified types of alarm text messages to all GSM Mobile Phones in a
predefined list.
5) Send specified types of alarm text messages to a predefined list of GSM Mobile
Phones in turn, until one of the Mobile Phone Users acknowledges the message.
Before you can use this feature:
1. Inform the installer of:
-The GSM Mobile phone network to be used.
-The phone numbers of the Mobile phones that are to send/receive the messages.
-Which type/s of alarm messages you would like to be sent to the Mobile phones.
e.g. All alarms, Area On/Off messages, Plant monitoring Alarms, etc.
(The installer will need to program the system to enable the function and define
the Area/s that will be reported and the type/s of messages to be reported)
2. Check that Short Message Service is enabled on your GSM Mobile Service.
3. Program the “Message Centre Number” into the Mobile phones.
IMPORTANT NOTES:
1) V3.50 to V4.0x. Alarm text messages can only be sent to one Mobile phone.
V4.50 or later. Up to 32 Mobile phones can receive Alarm text messages
depending on the Memory Size installed in your system, and other
Communications functions that are being utilized.
2) If the SMS Alarm needs to be Acknowledged and is being sent to a list of
Telephone numbers, once the Alarm is acknowledged, the message will not be
sent to any more Telephone numbers in the list.
To Next Page
Loading...
Need help?
General