Inner Range Concept 4000 - The Indicator Lamps; Time and Date; Custom Message

9
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
The Indicator Lamps.
TIME & DATE. (V5 or later only)
The Time and Date option allows the current
system Time and Date to be displayed.
This option is particularly useful if the system is
being utilized to generate Time-On-Site reports.
Users can be provided with a display of the actual
system Date & Time being logged.
CUSTOM MESSAGE.
The “Diaries” feature can be utilized to provide a
customized message that is appropriate for the
particular Site and/or the particular Terminal.
Some common applications are:
-The Monitoring Station’s Telephone number.
-The Installer’s Telephone number.
-“Welcome to <your company name>”
-“Enter PIN & OK to Logon”.












Four multi purpose lamps are provided across the top of the LCD Terminal for quick
and simple indication of Area and Alarm Status, Door functions and/or other
conditions. The settings can only be programmed by the Installer, who can also
advise you on the appropriate options.
When programmed for “Area Array”, the lamps will indicate the status of 4 sequential
Areas in the following manner:
Off = Area Off (Disarmed)
On = Area On (Armed)
Flashing = Alarm in this Area.
If the lamps have been programmed to indicate other conditions, please record their
purpose here:
Lamp 1....................................................................................................
Lamp 2....................................................................................................
Lamp 3....................................................................................................
Lamp 4....................................................................................................
TERMINAL
This option is only available in
V5 or later and requires a
compatible LCD Terminal.