38
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
REVIEW FILTER:
The DIGIT keys, 1 to 8 can be used to search back through review for specific types
of events, beginning from the date/time of the event currently displayed.
As there are more than 8 filter categories that can be selected, the “Mode” can be
changed by pressing the OFF key (OFF and ON keys if prior to V5 firmware),
allowing selection of more categories.
You can use these filter keys in conjunction with the UP and DOWN Arrow keys to
locate a specific event and then review all the other events around it in more detail.
KEY MODE 1. MODE 2.
1 Alarms & Restorals. System messages.
2 Reports. Times.
3 Auxiliary On & Offs. Detail.
4 Siren On & Offs. Communications.
5 User operations. Lifts.
6 Area On and Offs. Cards. (V3 or later)
7 Isolates/De-isolates. Spare.
8 Modules. Errors.
NOTE: Use to view the list of review filter categories available.
FILTER OPERATION:
V5 or later:
(Go to End of Review) then (if Mode 2 required) then to
select the filter option.
e.g. To find a specific Lift access event: Press <9>, then <OFF> (to select Mode 2)
then <5> to find the latest Lift access event. Continue to press the <5> key to find the
Lift access event/s that you are looking for. If necessary, you can now use the <UP> /
<DOWN> arrow keys to view all other types of events prior to, &/or after that event.
Prior to V5:
(Go to End of Review) then (Mode 1) OR (Mode 2) then
To Next Page
Loading...
Need help?
General