78
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
ASSIGN SUB MENU OPTIONS
This display is used to define the Sub Menu
options that the Menu Group will allow access to.
Use the <RIGHT> Arrow, followed by the <9>
(Y) & <5> (N) keys to set the desired options to
YES or NO.
Press <OK> to advance to the Special Options
screen. <UP> / <DOWN> to edit this option for
the previous/next Menu Group.
[U]ser Code programming.
User [T]ypes. Allows access to the specified Menu option if the
[L]ists. [A]ccess option is set to “Y” in the previous screen.
[G]roups.
Time[Z]ones. Allows access to TimeZones if the [t]imes option is
set to “Y” in the previous screen.
[R]eview. Allows access to Review if the [R]eview option is set
to “Y” in the previous screen. (V3 or later only)
[A]djust Counters. Allows access to Adjust Event Counters and Area
User Counters if [C]ontrol option set to “Y” in the
previous screen. (V3 or later only)
or or
, or
SPECIAL OPTIONS
There are currently 5 special options available
when programming Menu Groups. (V5.6 or later)
The desired options are set to YES or NO in the
same manner as described above.
[R]eset Latched Alarms. Allows Users to reset “Latched Alarms”. (Latched
Alarms feature is NOT used in most systems)
[H]omeZone Isolate. Forces the Isolate screens to be displayed as “Alpha-
search” HomeZones only. Do NOT set to Yes if the
HomeZone feature is not used in your system.
To Next Page
Loading...
Need help?
General