To Next Page

To Previous Page

CONCEPT 4000.CONCEPT 4000.

CONCEPT 4000. User Manual.

MENU GROUP OPTIONS

There are eight functional options which may be

set for a Menu Group.

Use the <RIGHT> Arrow, followed by the <9>

(Y) & <5> (N) keys to set the desired options to

YES or NO.

<OK> for next option. <UP> / <DOWN> to edit

this option for the previous/next Menu Group.









[R]emote Access. Allows remote access via Up/Download software.

[I]solate on Exit. Allows User to Isolate un-sealed zones on exit.

[D]efer Area On. Implements Area Defer timer operation when the

User turns an Area Off that has been defined as a

“Defer” Area. Area automatically re-arms when the

Defer timer expires, unless the User performs the

Area Off function again before the timer or warning

expires. (V2 or later only)

[C]ancel Holdup. Allows the User to cancel a Holdup alarm before it

reports, by entering their PIN at an LCD Terminal.

(V2 or later only)

[S]irens Off. Allows Users to automatically turn off any Sirens

running at the time of PIN code entry, regardless of

whether they are allowed control of the Area/s that

triggered the siren/s.

[A]cknowledge Messages. Allows Users to acknowledge alarm messages from

any Area, regardless of whether they are allowed

control of the Area/s that generated the message/s.

[M]ultiple Areas. Allows the User to turn On/Off more than one Area at

a time via an Area List. Any Area List can be chosen,

but only Areas in the User’s On/Off Lists will be

controlled.

[T]amper On/Off. Allows the User to turn Off the 24 Hr or Tamper part

of any Area in their Area OFF List.

or or

, or

Inner Range Concept 4000 User Manual

Other manuals for Inner Range Concept 4000