Inner Range Concept 4000 User Manual

41
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
READ COUNTERS
In some systems Mini Expander modules are
installed to perform Event Counting. Event
Counters can be used to monitor film in security
cameras, water or electricity usage, traffic through
a designated point, etc.
“READ COUNTERS” can then be used to display
the current value of the counters. (V3 or later only)
The display will show the result of the first Counter
available to be viewed.
The <UP> and <DOWN> arrow keys can be used
to scroll through the results of the other counters.
The displayed count is refreshed every 2 seconds
by reading the latest count from the relevant Mini
Expander module.
Press the <END> key to exit to the normal display.
NOTES:
1) All Counters used in the system should
always be named by the Installer. A screen similar
to this showing the default Counter ID will be
displayed for Counters that are not used.
The installer can disable display of unused Counters.
2) In some applications it may be necessary for
a User to adjust the current value of a particular
counter, or reset the counter to zero.
This can be done via a separate Menu option that
will probably be restricted to one or more User
Types. Details are provided in “Adjust Counters”,
[MENU, 9, 6].


















STATUS

Inner Range Concept 4000 Specifications

General

Brand	Inner Range
Model	Concept 4000
Category	Touch terminals
Language	English