Inner Range Concept 4000 User Manual

39
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
LOCATE USER
In some systems INSIDE and/or OUTSIDE Areas
will have been assigned to Access Controlled
Doors. “LOCATE USER” can then be used to
display the Area that the user is currently in.
The display will show the Area name on the top
line and the User name on the bottom line.
To search for a particular User alphabetically,
press the <DIGIT> key that represents the first
letter of the User’s name. (You may have to press
the key 2 or 3 times, depending on the letter
required and the User names in the system.)
If the User name you want is not displayed
because of other names beginning with the same
letter, use the <DOWN> Arrow key to locate it.
In this mode the <UP> and <DOWN> Arrows can
be used to scroll through the list of Users.
To find a particular User by number, press the
<ON> key to change the display mode.
Use the <DIGIT> keys to enter the User number
required. The <RIGHT> Arrow key may be used
to advance the cursor. The <OFF> key may be
used to clear the user number before you begin.
Press the <ON> key again to view the Area and
User’s name.












  
  
 





















  
  
 



STATUS

Inner Range Concept 4000 Specifications

General

Brand	Inner Range
Model	Concept 4000
Category	Touch terminals
Language	English