Inner Range Concept 4000 User Manual

73
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.






or or
or or
ALTERNATE LIST.
The display will show the current Alternate List.
If an Alternate List is assigned it will be used
instead of this List whenever the TimeZone (if
assigned in the previous option) is Invalid.
e.g. An Alternate Door List can be used to allow
Users to maintain access to some Doors, even
when the TimeZone on their User Type’s Door
List is Invalid.
Press the <DIGIT> key that represents the first
letter of the name of the List AND/OR Press the
<RIGHT> arrow key to scroll through the names
until the required List is displayed OR Press
<OFF> to set the Alternate List to “None”.
<OK> key for next option. <UP> or <DOWN>
key to edit this option for the previous/next List.
ASSIGN THE ITEMS TO THE LIST.
The display will show the first 8 items (Doors, Lifts,
etc.) in the system, with a letter below each to
indicate: Y The item is IN the List
n The item is NOT in the List.
Use the <RIGHT> Arrow key, followed by the
<9> (Yes) key to assign the appropriate items
(Doors, Lifts, etc.) to the list. Use the <5> (No)
key to remove items from the List.
Press <OK> to step on to the next 8 items, or the
<LEFT> arrow to step back to the previous 8 items.
The number on the bottom left of the display
indicates the first item shown in the current array.
e.g. D017 = Doors 17 to 24.
<UP> or <DOWN> key to edit this option for the
previous/next List,
<END> key to exit the Menu, OR
<MENU> key to select another Menu option.






or
or or
or , ...
, or






LISTS

Inner Range Concept 4000 Specifications

General

Brand	Inner Range
Model	Concept 4000
Category	Touch terminals
Language	English