Inner Range Concept 4000 - Menu Groups; Selecting a Menu Group

74
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
MENU GROUPS


















OR
OR
then if required.
Some Users, such as System Administrators, may
be allowed to program “Menu Groups”. Menu
Groups are assigned to User Types to define what
actions, functions and menu options the User Type
is allowed to perform or access when logged on to
an LCD Terminal.
SELECTING A MENU GROUP.
The display will first allow you to choose a Menu
Group to alter.
Method i - Select by number. The <DIGIT>
keys are used to enter a number OR the <UP> and
<DOWN> Arrows will scroll through the
numbers.
Method ii - Alpha-search. Pressing the <ON>
key allows the name of an existing Menu Group to
be selected.
The <UP> and <DOWN> Arrows will search
through the names, OR
Press the <DIGIT> key that represents the first
letter of the name. (You may have to press the key
2 or 3 times to obtain the required letter.)
If the name you want is not displayed because of
other names starting with the same letter, use the
<DOWN> Arrow key to locate the name.
When the desired number or name of the Menu
Group is located, press the <OK> key to proceed.