109
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
When using RF Fobs, only 1 button may be pushed at a time and a pause of at least 2
seconds is required between subsequent button pushes. (This avoids repeated
processing if the transmission is received by more than one RF Expander Module.)
USER FEEDBACK OPTIONS.
System Feedback options
The system can provide the following standard Fob feedback options to control
Indicator or Warning devices such as Sounders, Lamps, Sirens or LCD Terminal
beepers.
Consult your Installer regarding the system feedback requirements for your system.
Area is turned On (Armed) Trigger an Auxiliary output for 2 Seconds.
Area is turned Off (Disarmed) Trigger an Auxiliary output for 5 Seconds.
Area Fails to Arm Trigger the Siren, and/or another Auxiliary output for
approximately 5 Seconds.
Paradox REM2 and REM3 Feedback features.
In addition to the system feedback options, the Paradox REM2 and REM3 Wireless
Remotes also provide feedback via one or more lamps on the remote.
The Information key can be used to request the current status of the Area assigned to
the ARM/DISARM-OFF buttons on the remote.
Press the key for 2 s until you see an orange flash on the lamp above the key.
Current Area status is indicated as follows:
REM2: Lamp is Green = Area Off. Lamp is Red = Area On.
REM3: The red “ARM” and orange “OFF” lamps will indicate the Area status.
Feedback is also provided for the following actions:
RF Remote
noitcA2MER3MER
nOaerAspeeb4+nODERnOMRA
mralA+nOaerAspeeb4+hsalFwolSDERhsalFwolSMRA
ffOaerAspeeb4+nONEERG.nOFFO
ya
leDtixEspeeb4+hsalFtsaFNEERGhsalFtsaFFFO
yaleDyrtnEspeeb4+hsalFtsaFDERhsalFtsaFMRA
KOnoitcAspeeb4+nOEGNAROspe
eb4+neerGSUTATS
deliaFnoitcAspeeb4+hsalFwolSEGNAROpeebgnoL+deRSUTATS
To Next Page
Loading...
Need help?
General