Inner Range Concept 4000 User Manual

22
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
Activating a “Panic” Alarm.
Your system may be programmed to allow a Panic alarm to be easily activated from any
LCD Terminal without needing to Log on.
A Panic Alarm is activated by simply pressing the <HELP> key three times in a row.
When a Panic alarm is activated, the resulting action will depend on how the optional
“Panic” System Inputs are programmed for each of the LCD Terminals in the system.
e.g. In some sites, Panic may be required to activate local Sirens and send a report to a
Computer in a local Control Room. In other sites Panic may be treated as a “Silent”
system alarm with a report sent to a remote monitoring station and no local action at all.
IMPORTANT NOTE: Consult your Installer to detemine if the Panic function is
enabled and how it will operate in your system.












Press the <HELP> key at any LCD Terminal that
has the Panic option enabled.
The display will show the normal logon help
message.
Press the <HELP> key again within 60 seconds,
The display will prompt you to press the <HELP>
key again if you want to activate the Panic alarm.
Press the <HELP> key again within 10 seconds to
activate the Panic alarm,
OR Press the <END> key to abort if you pressed
the Help key a second time accidentally.
The display may show an alarm message, or may
simply return to the normal display depending on
how the Panic alarm is processed.
or

Inner Range Concept 4000 Specifications

General

Brand	Inner Range
Model	Concept 4000
Category	Touch terminals
Language	English