User’s Manual INNOMAR Parametric Sub-Bottom Profilers / SESWIN 137
Innomar Technologie GmbH (2023-01) 137
10.2.3 Data Conversion
All files, which have been selected in the file browser, are going to be converted using the same
settings, if the “Start Conversion” button has been pressed. File names are generated
automatically using the INNOMAR data file name and a channel identifier. Optionally, there is an
ASCII export of the coordinates.
If both channels were selected to be converted (“LF-HF Channels”), there will be two SEG-Y files
generated. If there are multi-frequency INNOMAR data files converted, there will be one SEG-Y
file per frequency.
Please note, that existing files (same file name) will be replaced without warning message.
To Next Page
Loading...