User’s Manual INNOMAR Parametric Sub-Bottom Profilers / SESWIN 41
Innomar Technologie GmbH (2023-01) 41
5.3 SESWIN Screen
Menu
Bar
Info
Sidebar
Status
Bar
Depth
Display
Depth
Ruler
Signal
Window
Factory default is to show the data of both, the LF and HF, channels. Mostly the main interest is
the LF data. To enlarge the screen area available for the LF channel, the HF echo print can be
switched off: (1) “View” (2) “SBP Display Style” (3) “Low Frequency only”
The echo print area can be further increased by reducing or hiding the “Signal” and “Zoom” tabs.
For this the button (4) between the echo print tab and the “Signal” tab is used. Press and hold to
SBP echo print
Zoomed
LF SBP
echo print
1
2
3
4
5
5
To Next Page
Loading...