innomar SBP smart - SESWIN Info Sidebar; SESWIN SBP Signal Display and Depth Ruler; SESWIN Sidescan Signal Display (Light-Plus; Standard-Plus)

44 User’s Manual INNOMAR Parametric Sub-Bottom Profilers / SESWIN
44 Innomar Technologie GmbH (2023-01)
5.5 SESWIN Info Sidebar
On the left-hand part of the INNOMAR SESWIN application status
information on external sensors and the SBP system is given:
 Navigation data (up to eight info strings can be stored with the
INNOMAR data),
 Motion sensor data (heave, roll, pitch; if available also
heading and yaw),
 Date and time from the PC clock,
 Data annotation like ship name, travel ID, area name, profile
number,
 SBP foot print diameter,
 System status information like operation mode.
For the INNOMAR “light-plus” and “standard-plus” models, the
“Information” tab also lists sidescan related items:
5.6 SESWIN SBP Signal Display and Depth Ruler
The depth ruler shows the SBP data acquisition range. Note that data
outside this range will not be collected.
The “Signals” window shows the envelope (amplitude) data of the
last received ping (LF: green, HF: black). This is an excellent tool to
optimize the gain settings.
5.7 SESWIN Sidescan Signal Display (“light-plus” / “standard-plus”)
This is for “light-plus” and “standard-plus” models only!
Similar to the SBP signal
display, the envelope ampli-
tude of the last received
sidescan ping is shown as
well to have feedback for
gain settings.