78 User’s Manual INNOMAR Parametric Sub-Bottom Profilers / SESWIN
78 Innomar Technologie GmbH (2023-01)
5.11.19 System Setup – Settings – Save Settings
It is possible to save settings either specific for a survey type or preferred by
a user. These settings are available during SESWIN start-up, see section 5.2
on page 38.
5.11.20 System Setup – Settings – Screenshot of all Settings
This can be used to get screenshots of all system settings placed in the
SESWIN folder. Pictures are named with the dialog’s name and date/time.
This should be done if all parameters for a survey are set in order to complete
the documentation for further reference. Take care to re-do this if any settings
have changed.
5.12 SESWIN System Setup – Appearance
This is to change the colour scheme of the SESWIN
application to fit your needs or preferences.
To Next Page
Loading...