User’s Manual INNOMAR Parametric Sub-Bottom Profilers / SESWIN 191
Innomar Technologie GmbH (2023-01) 191
A.11 Innomar deep-36 SBP
There are two model versions, one with heave and roll compensation (“Basic”) and one with
additional pitch compensation (“RP”).
Main Technical Specifications
Primary High Frequencies (PHF) c. 36 kHz (band 30 – 42kHz)
Primary Source Level / Acoustic Power > 246 dB//µPa re 1m / c. 9 kW
Secondary Low Frequency (SLF) 2, 3, 4, 5, 6, 7 kHz (centre frequency, user selectable)
SLF Total Frequency Band 1 – 10 kHz
SLF Source Level c. 210 dB//µPa re 1m
SLF Pulse Type Ricker, CW, LFM chirp (2 – 7 kHz)
SLF Pulse Width 0.15 – 1.5 ms (CW, user selectable); 5 ms (LFM chirp)
Beam Width (-3dB) about ±1.5° for all frequencies (footprint c. 5.5% of water depth)
Heave / Roll / Pitch compensation “Basic” version: Heave + Roll (±15°) @ TX+RX
“RP” version: Heave + Roll (±15°) + Pitch (±10°) @ TX+RX;
depending on external sensor data (for both versions)
Water Depth Range 5 – 6,000 m below transducer
Sediment Penetration soft clay: 150 m, sand: 20 m;
depending on noise, pulse settings and geological conditions
Sample Resolution / Range Resolution <1 cm / up to 15 cm (depending on pulse settings)
Pulse Rate up to 40 pings/s
Data Acquisition and Recording digital 24 bit / 75 kHz; full waveform (“SES3” file format)
External Sensor Interfaces HRP (motion), GNSS position, depth (all RS232 / UDP), trigger
Bottom Detection internal (HF and LF data) or external depth
Depth Accuracy (6 cm @ 36 kHz / 12 cm @ 3.6 kHz) + 0.06% of water depth
Remote Control / Survey Integration KVM / basic functions via COM or Ethernet (UDP), NMEA
Transceiver Dimensions / Weight “Basic” vers.: 52 cm × 50 cm × 50 cm (19’’ / 10U) / c. 56 kg
“RP” version: 52 cm × 50 cm × 63 cm (19’’ / 13U) / c. 66 kg
Transducer Dimensions / Weight 88 cm × 92 cm × 18 cm / c. 245 kg (excl. cables), see below
Survey Vessel Speed up to 15 knots (depending on survey goal, weather conditions)
Power Supply 100 – 240 V AC / 50 – 60 Hz (fuse 16 A / slow)
Power Consumption <900 W (max. power-on inrush current 25 A / <100 ms)
Environmental Conditions Storage: -10…+60°C / <90% non-condensing rel. humidity
Operation: 0…+40°C / <70% non-condensing rel. Humidity
Control & Data Acquisition PC Integrated PC (MS Windows
®
10/11 OS), proc. I5 or better,
8 GB RAM, 1 TB SSD, Geforce GT710 1 GB graphics card,
1 Gbit Ethernet, 3×USB3.0, 2×USB2.0, 4×RS232, 1×HDMI1.4a
First / Latest Product Generation 2007 / 2021
Technical specs are subject to change without prior notice, see www.innomar.com/products for latest infos.
System Components / Wiring Schematic
To Next Page
Loading...