■negotiated BGP version—BGP version being used to communicate with the
neighbor
■Administrative status—Desired state of the peer connection
■Connection state—Current state of the BGP connection
■Connection has been established—Time that TCP connection was established
■Reason for last reset—Reason for last reset of the BGP session
■TCP error code—TCP connection error type
■Default originate—Status of default originate (enabled or disabled)
■EBGP multi-hop—Status of EBGP multihop (enabled or disabled)
■IBGP single-hop—Status of IBGP single hop (enabled or disabled)
■Next hop self—Status of next-hop self (enabled or disabled)
■Route reflector status—Identifies the neighbor as a route-reflector client
■Neighbor weight—Weight of routes from the BGP neighbor
■Incoming update distribute list—Distribute list for incoming routes, if
configured
■Outgoing update distribute list—Distribute list for outgoing routes, if
configured
■Incoming update filter list—Update filter list for incoming routes, if configured
■Outgoing update filter list—Update filter list for outgoing route, if configured
■Weight filter list—Weight filter list for routes, if configured
■Incoming route map—Incoming route map, if configured
■Outgoing route map—Outgoing route map, if configured
■Connect retry interval—Time between a BGP peer’s attempts to reestablish
a connection to the neighbor
■Minimum route advertisement interval—Minimum time between route
advertisements
■Minimum AS origination interval—Minimum time between advertisement
of changes within the speaker’s AS
■Configured keep-alive interval—Frequency of keep-alive messages generated
■Negotiated keepalive interval—Negotiated frequency of keep-alive messages
generated
■Configured hold time—Configured maximum time allowed between received
messages
178 â– Monitoring BGP
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
