■ Reassemble Timeout—Value to time out reassembled packets
■ Interface Configured—Interface configured for the VRF
■ Import VPN Route Target Extended Communities—List of VPNs from which
the VRF accepts routing information
■ Export VPN Route Target Extended Communities—List of VPNs to which
the VRF sends update messages
■ Import Route-map—Route map associated with the VRF that filters and
modifies routes imported to the VRF from the global BGP VPN RIB. The map
applies to both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies the map to only IPv4 routes) or IPv6 (applies the map to only
IPv6 routes).
■ Export Route-map—Route map associated with the VRF that modifies and
filters routes exported by the VRF to the global BGP VPN RIB. The map
applies to both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies the map to only IPv4 routes) or IPv6 (applies the map to only
IPv6 routes). The can filter routes text appears only if the filter keyword was
issued for export map.
■ Global Import Route-map—Route map associated with the VRF that modifies
routes imported to the VRF from the global BGP non-VPN RIB. The map
applies to both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies to only IPv4 routes) or IPv6 (applies to only IPv6 routes).
■ Global Export Route-map—Route map associated with the VRF that modifies
routes exported by the VRF to the global BGP non-VPN RIB. The map applies
to both IPv4 and IPv6 routes, unless the field name is preceded by IPv4
(applies the map to only IPv4 routes) or IPv6 (applies the map to only IPv6
routes).
■ Example
host1:pe1#show ip vrf detail
VRF pe11; Default RD 100:11
VRF IP Router Id: 10.11.11.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.11 tun mpls:vpnEgL17-3 ip dyn-24
Import VPN Route Target Extended Communities:
100:1
Export VPN Route Target Extended Communities:
100:1
IPv4 Import Route-map: my-v4-import-map
IPv6 Import Route-map: my-v6-import-map
IPv4 Export Route-map: my-v4-export-map (can not filter routes)
IPv6 Export Route-map: my-v6-export-map (can filter routes)
IPv4 Global Import Route-map: my-v4-global-import-map (max routes 5000)
IPv6 Global Import Route-map: my-v6-global-import-map (max routes 1000)
IPv4 Global Export Route-map: my-global-v4-export-map
IPv6 Global Export Route-map: my-global-v6-export-map
VRF pe12; Default RD 100:12
496 ■ Monitoring BGP/MPLS VPNs
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...