Juniper BGP - CONFIGURATION GUIDE V 11.1.X User Manual

VRF IP Router Id: 10.12.12.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.12 tun mpls:vpnEgL18-4 ip dyn-25
Import VPN Route Target Extended Communities:
100:2
Export VPN Route Target Extended Communities:
100:2
Import Route-map : importmap1
Export Route-map : exportmap23 (can filter routes)
Global Import Route-map : globalimportmap2
Global Export Route-map : globalexportmap3
VRF pe13; Default RD 100:13
VRF IP Router Id: 10.13.13.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.13 tun mpls:vpnEgL19-5 ip dyn-26
Import VPN Route Target Extended Communities:
100:3
Export VPN Route Target Extended Communities:
100:3
No Import Route-map
No Export Route-map
No Global Import Route-map
No Global Export Route-map
■ See show ip vrf.
show ip vrf interfaces
■ Use to display summary information about all interfaces associated with all VRFs
configured in a virtual router.
■ Use the detail keyword to display detailed information about the interfaces.
■ Field descriptions
■ Interface—Interface type and interface specifier
■ IP-Address—IP address of the interface
■ Status—Status of the interface
■ Protocol—Status of the line protocol
■ VRF—Name of the VRF with which the interface is associated
■ interface status—Status of the interface
■ line protocol—Status of the line protocol
■ Link up/down trap—Status of SNMP link up/down traps on the interface
■ Internet address—IP address of the interface
Monitoring BGP/MPLS VPNs ■ 497
Chapter 5: Configuring BGP-MPLS Applications

Juniper BGP - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	BGP - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English