EasyManua.ls Logo

Juniper BGP - CONFIGURATION GUIDE V 11.1.X

Juniper BGP - CONFIGURATION GUIDE V 11.1.X
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
atm clock inter mod
interface atm 2/0.1
atm pvc 1 1 11 aal5snap
ip address 10.10.11.2 255.255.255.0
ip router isis
mpls
mpls ldp
router isis
net 47.0005.80FF.F800.0000.0000.0004.0000.F209.0202.00
mpls traffic-eng router-id loopback 0
mpls traffic-eng level-1
metric-style wide
!--------------------------------------------------------------------------
!Create virtual router three. Configure MPLS.
!--------------------------------------------------------------------------
virtual-router three
mpls
mpls ldp tar send list 222.9.1.2
interface loopback 0
ip address 222.9.1.3 255.255.255.255
ip router isis
interface atm 2/0.2
atm pvc 2 1 12 aal5snap
ip address 10.10.12.3 255.255.255.0
ip router isis
mpls
mpls ldp
router isis
net 47.0005.80FF.F800.0000.0000.0004.0000.F209.0303.00
mpls traffic-eng router-id loopback 0
mpls traffic-eng level-1
metric-style wide
!--------------------------------------------------------------------------
!Create virtual router four.
!--------------------------------------------------------------------------
virtual-router four
interface loopback 0
ip address 222.9.1.4 255.255.255.255
!--------------------------------------------------------------------------
!Create virtual router five. Configure MPLS.
!--------------------------------------------------------------------------
virtual-router five
mpls
interface loopback 0
ip address 222.9.1.5 255.255.255.255
ip router isis
interface atm 2/1.1
atm pvc 1 1 11 aal5snap
ip address 10.10.11.5 255.255.255.0
ip router isis
mpls
546 Frame Relay over MPLS Configuration Example
JUNOSe 11.1.x BGP and MPLS Configuration Guide

Table of Contents

Related product manuals