host1#clear bridge interface atm 3/3.2
There is no no version.
Clearing All Dynamic MAC Addresses for the VPLS Virtual Core Interface Associated with
A VPLS Instance
To clear all dynamic MAC address entries for the VPLS virtual core interface associated
with a VPLS instance:
â– Issue the clear bridge interface vpls command.
host1#clear bridge interface vpls vplsA
There is no no version.
Related Topics â– clear bridge
â– clear bridge address
â– clear bridge interface
â– clear bridge interface vpls
Clearing BGP Attributes for VPLS
You can use the following clear ip bgp commands to remove specific BGP attributes
for the L2VPN address family, and in one case, for the VPLS address family associated
with a specific VPLS instance.
Clearing BGP Reachability Information for the L2VPN Address Family
To clear BGP reachability information for the L2VPN address family:
â– Issue the clear ip bgp command.
host1#clear ip bgp l2vpn soft in
Use the soft in keywords to trigger inbound soft reconfiguration. There is no no
version.
Clearing BGP Route Flap Dampening Information for the L2VPN Address Family
To clear route flap dampening information for the L2VPN address family:
â– Issue the clear ip bgp dampening command.
host1#clear ip bgp l2vpn dampening
616 â– Clearing BGP Attributes for VPLS
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
