Keithley 2700 User Manual

Model 2700 Multimeter/Switch System User’s Manual SCPI Reference Tables 15-25
Table 15-9
Trigger command summary
Command Description
Default
parameter
Ref SCPI
INITiate Subsystem command path: Sec 8 ✓
[:IMMediate] Initiate one trigger cycle. ✓
:CONTinuous <b> Enable or disable continuous initiation. (Note 1) ✓
:CONTinuous? Query continuous initiation. ✓
ABORt Reset trigger system. ✓
TRIGger[:SEQuence[1]] Path to program Trigger Layer: ✓
:COUNt <n> Set measure count (1 to 55000, or INFinity). (Note 2) ✓
:COUNt? Query measure count. ✓
:DELay <n> Set delay (0 to 999999.999 sec). 0 ✓
:AUTO <b> Enable or disable auto delay. OFF
:AUTO? Query state of delay.
:DELay? Query delay. ✓
:SOURce <name> Select control source (IMMediate, TIMer,
MANual, BUS, or EXTernal).
IMM ✓
:SOURce? Query control source. ✓
:TIMer <n> Set timer interval (0.001 to 999999.999 sec). 0.1 ✓
:TIMer? Request the programmed timer interval. ✓
:SIGNal Loop around control source. ✓
SAMPle
:COUNt <NRf> Specify sample count (1 to 55000). 1
:COUNt? Query sample count.
Notes:
1. Defaults for continuous initiation:
SYSTem:PRESet enables continuous initiation.
*RST disables continuous initiation.
2. Defaults for count:
SYSTem:PRESet sets the count to INF (infinity).
*RST sets the count to 1.

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD