Keysight EXA N9010A User Manual

6 System Functions
System
Notes The values displayed on the screen are only updated upon entry to the screen and not updated while
the screen is being displayed.
Initial S/W Revision Prior to A.02.00
Key Path
Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command
:SYSTem:PON:TIME?
Example :SYST:PON:TIME?
Notes Value is the time since the most recent start-up in seconds.
State Saved No
Initial S/W Revision Prior to A.02.00
Key Path
Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command
:CALibration:TEMPerature:CURRent?
Example :CAL:TEMP:CURR?
Notes Value is in degrees Centigrade.
Value is invalid if using default alignment data (Align Now, All required)
State Saved No
Initial S/W Revision Prior to A.02.00
Key Path
Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command
:CALibration:TIME:LALL?
Example :CAL:TIME:LALL?
Notes Value is the elapsed time, in seconds, since the last successful Align Now, All or Align Now, All but
RF was executed.
State Saved No
Initial S/W Revision Prior to A.02.00
Key Path
Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command
:CALibration:TEMPerature:LALL?
Example :CAL:TEMP:LALL?
304 EMI Receiver Mode Reference

Keysight EXA N9010A Specifications

General

Brand	Keysight
Model	EXA N9010A
Category	Measuring Instruments
Language	English