KDC User Manual SYNCHRONIZATION
178
• Serial Number
When Attach serial number is enabled, this option determines when to attach serial
number. “Start of record” means to attach at the front of record and “End of record”
means to attach to the end of record.
• Data Order
This option specifies the order of data (Barcode Type, Barcode Data and Timestamp) in
the record.
• Data Delimiter
This option is used to select a character to be added between barcode data, serial
number and timestamp and/or barcode type. User may select one of the following:
None, Tab, Space, Comma and Semicolon as the data delimiter. The Comma is selected
as the data delimiter by default.
• Record Delimiter
This option is used to select a character to be added at the end of the barcode record.
The user may select one of None, CR, LF, TAB, and CR&LF as the record delimiter. The
CR&LF is selected as the record delimiter by default.
Other Options
• Non-English Keyboard
This option is used when the barcode data has non-English characters and a non-
English keyboard.
To Next Page
Loading...
